24-port 10/100Mbps PoE Switch PLANET FGSW-2624HPS

Hardware Specifications

10/100Mbps Copper Ports

24 10/100BASE-TX RJ45 auto-MDI/MDI-X ports

Gigabit Copper Ports

2 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports

SFP/mini-GBIC Slots

2 1000BASE-X SFP interfaces, shared with Port-25 to Port-26

Switch Architecture

Store-and-Forward

Switch Fabric

8.8Gbps / non-blocking

Throughput

6.54Mpps@64Bytes

Address Table

4K entries, automatic source address learning and ageing

Shared Data Buffer

2.75Mb embedded memory for packet buffers

Flow Control

IEEE 802.3x pause frame for full-duplex

Back pressure for half-duplex

Maximum Transmit Unit

1518 Bytes

Reset Button

< 5 sec: System reboot

> 5 sec: Factory default

Dimensions 

440 x 300 x 44.5 mm, 1U height

Weight

4142g

Power Consumption

FGSW-2624HPS: Max. 297 watts / 1013.4 BTU

FGSW-2624HPS4: Max. 513 watts / 1750.4 BTU

ESD Protection

Contact Discharge 4KV DC

Air Discharge 8KV DC

LED

FGSW-2624HPS:

System:

Power (Green)

10/100BASE-TX RJ45 Interfaces (Port 1 to Port 24):

10/100Mbps LNK/ACT (Green)

PoE-in-Use (Orange)

10/100/1000BASE-T RJ45 / SFP Interfaces (Port 25 to Port 26):

LNK/ACT (Green)

100/1000 (Green)

PoE Usage

50W, 100W, 150W, 190W (Orange)

Cable

Twisted-pair:

10BASE-T: 2-pair UTP Cat 3, 4, 5 for up to 100 meters

100BASE-TX: 2-pair UTP Cat 5, 5e for up to 100 meters

1000BASE-T: 4-pair UTP Cat 5e, 6 for up to 100 meters

Fiber-optic Cable:

1000BASE-SX:

50/125μm or 62.5/125μm multi-mode fiber-optic cable, up to 550m (varying on SFP module)

1000BASE-LX:

9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/70/120 kilometers (varying on SFP module)

Power over Ethernet

PoE Standard

IEEE 802.3af / 802.3at PoE / PSE

PoE Power Supply Type

End-span

Power Pin Assignment

1/2(+), 3/6(-)

PoE Power Output

FGSW-2624HPS: Per Port 52VDC, Max. 30.8 watts

PoE Power Budget

FGSW-2624HPS:

220 watts (max.) @ 25 degrees C

190 watts (max.) @ 50 degrees C

FGSW-2624HPS4:

420 watts (max.) @ 25 degrees C

420 watts (max.) @ 50 degrees C

PoE Ability

FGSW-2624HPS:

PD @ 7 watts: 24 units

PD @ 15.4 watts: 14 units

PD @ 30 watts: 7 units

Layer 2 Functions

Port Configuration

Port disable / enable

Auto-negotiation 10/100/1000Mbps full and half duplex mode selection

Flow Control disable / enable

Port Status

Display each port’s speed duplex mode, link status, flow control status, auto negotiation status and trunk status

Port Mirroring

TX / RX / Both

Many-to-1 monitor

VLAN

802.1Q tagged-based VLAN, up to 32 VLAN groups, out of 4094 VLAN IDs

Port-based VLAN, up to 26 VLAN groups

MTU VLAN

Link Aggregation

1 group of 2-Port 10/100/1000BASE-T trunk supported

QoS

Allows to assign low / high priority on each port

First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy