Thông số kỹ thuật chi tiết MAINBOARD SUPERMICRO X9DRL-7F

• MBD-X9DRL-7F-O :

  X9DRL-7F (Standard Retail Pack)

• MBD-X9DRL-7F-B :

  X9DRL-7F (Bulk Pack)

• Physical Stats:

  - Form Factor : ATX
  - Dimensions : 12" x 10" (30.48cm x 25.4cm)

• Processor/Cache:

  - CPU:
  Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 130W TDP **)
  Dual Socket R (LGA 2011)
  - Cache:
  Up to 30MB
  - System Bus:
  QPI up to 8 GT/s
  - Note:
  † BIOS version 3.0 or above is required
  - Note
  ** Motherboard supports this maximum TDP. Please verify your system can thermally support

• System Memory:

  - Memory Capacity :
  8x 240-pin DDR3 DIMM slots
  Up to 512GB DDR3 ECC LRDIMM
  Up to 256GB DDR3 ECC RDIMM
  Up to 64GB DDR3 ECC/non-ECC UDIMM
  - Memory Type :
  1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  Support ECC and non-ECC UDIMMs
  - DIMM Sizes :
  32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
  64GB LRDIMM
  - Memory Voltage :
  1.5 V, 1.35 V
  - Error Detection :
  Corrects single-bit errors
  Detects double-bit errors (using ECC memory)

• On-Board Devices:

  - Chipset :
  Intel® C602J chipset
  - SATA :
  SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
  SATA 3.0 6Gb/s with RAID 0, 1, 10
  - SAS :
  SAS2 from Broadcom 2208
  HW RAID 0, 1, 10 support
  Battery Backup Unit (BBU) is not supported
  Supports up to 16 devices as default, more HDD devices support is also available as an option *

  * For special sku, please contact your Supermicro Sales.
  - IPMI :
  Support for Intelligent Platform Management Interface v.2.0
  IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  Nuvoton WPCM450 BMC
  - Network Controllers :
  Intel® i210 Gigabit Ethernet
  Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  1x Realtek RTL8201F PHY (dedicated IPMI)
  - Video :
  Matrox G200eW

• Input / Output:

  - SATA :
  2 SATA 3.0 ports (6Gb/s)
  4 SATA 2.0 ports (3Gb/s)
  - SAS :
  8 SAS ports
  - LAN :
  2 RJ45 Gigabit Ethernet LAN ports
  1 RJ45 Dedicated IPMI LAN port
  - USB :
  7 USB 2.0 ports total
  (4 rear + 2 via header + 1 Type A)
  - Video :
  1 VGA port
  Serial Port / Header
  Total of 2 COM ports: 1 rear, 1 via header
  - DOM :
  1 DOM (Disk on Module) power connector
  - TPM :
  1 TPM Header

• Chassis (Optimized for X9DRL-7F):

  - 1U Chassis :
  CSE-813MFTQ-441CB
  CSE-813MFTQ-R400CB
  -2U Chassis :
  CSE-826TQ-653B
  - 3U Chassis :
  CSE-833T-653B
  - Mid-Tower :
  CSE-732i-500B
  - Tower / 4U Rackmount :
  CSE-842TQ-665B
  CSE-842TQ-865B
  - Important Chassis Notes :
  To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.

• SuperServer(s) with X9DRL-7F:

  - Model(s) :
  SYS-6017R-M7UF
  SYS-6017R-M7RF

• Expansion Slots:

  - PCI-Express :
  2 PCI-E 3.0 x8
  1 PCI-E 2.0 x4 (in x8)
  1 PCI-E 2.0 x1

• System BIOS:

  - BIOS Type :
  128Mb SPI Flash EEPROM with AMI BIOS
  - BIOS Features :
  Plug and Play (PnP)
  APM 1.2
  PCI 2.3
  ACPI 1.0 / 2.0 / 3.0 / 4.0
  USB Keyboard support
  SMBIOS 2.7.1
  UEFI 2.3.1

• Management:

  - Software :
  SuperDoctor® III
  Watch Dog
  IPMI 2.0
  - Power Configurations :
  ACPI / APM Power Management
  Power-on mode for AC power recovery

• PC Health Monitoring:

  - Voltage :
  Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  5+1 Phase-switching voltage regulator
  PCH cores (1.1V and 1.5V)
  - FAN :
  6x 4-pin fan headers with tachometer monitoring
  Status monitor for speed control
  Pulse Width Modulated (PWM) fan connectors
  - Temperature :
  Monitoring for CPU and chassis environment
  CPU thermal trip support
  Thermal Control for 6x Fan Connectors
  Thermal Monitor 2 (TM2) support
  PECI
  - LED :
  CPU / System Overheat LED
  Suspend static indicator LED
  UID/Remote UID
  Other Features
  Chassis intrusion detection
  Chassis intrusion header
  RoHS, Halogen Free
  Dual Cooling Zones

• Operating Environment:

  - Operating Temperature Range:
  10°C - 35°C (50°F - 95°F)
  - Non-Operating Temperature Range :
  -40°C - 70°C (-40°F - 158°F)
  - Operating Relative Humidity Range :
  8% - 90% (non-condensing)
  - Non-Operating Relative Humidity Range :
  5% - 95% (non-condensing)